What You Need to Know about Concrete before Using Concrete Forming Systems in Your Project

concrete-wall-froms_orig

It’s hard to imagine a construction project that does not involve the use of concrete. For millennia, builders have used all sorts of composite material they produce by combining fine and coarse aggregates. The most trusted option, which is still extensively used today even with the growing popularity of “sustainable” materials, is concrete, and for good reasons. The following information may enlighten you on the real reason why concrete is still the best construction material available.

Fire and Water Resistance

Although the formula for making concrete includes water as the binder, the final output is actually impervious. Meaning, water or any other fluid cannot seep through it, except if the concrete was poorly done and has tiny voids within it. The final output is also essentially a rock, and so it doesn’t burn like wood or plastic. It has a higher thermal resistance than metal as well, which makes it a perfect material for constructing structures that are intended for applications involving high heat.

Read more here: http://www.lecoconcreteforms.com/blog/what-you-need-to-know-about-concrete-before-using-concrete-forming-systems-in-your-project

Advertisements

Concrete Forming Systems: How Do You Know If You Are Using the Right Material?

8-27-18_orig

Thirteen construction workers were severely injured while working at a mixed-use development in Oakland, California on May 2017. The cause of the accident was the collapse of a shoring system while concrete was being poured into the formwork it was supporting. Investigators later found evidence that point to safety violations committed by the three main contractors of the project, who were later fined $147,315 for damages.

This incident is a perfect example of the disaster that can happen if the concrete forming systems used during construction fall short of building standards, which begs the question, “what type of formwork is safe to use?” or “how do you know which type of material makes a good formwork?”

Read more here: http://www.lecoconcreteforms.com/blog/concrete-forming-systems-how-do-you-know-if-you-are-using-the-right-material

The Importance of Concrete Forming Systems to an Efficient Job Site

1_2_orig
Construction job sites ideally run on a very tight schedule. The progress of the work rests not just on the efficiency of the workers but also on the reliability and durability of the materials used. The manner by which these materials are prepared and utilized also have a direct impact on the workflow process. In pouring cement, for example, both form and timing will determine how well the final product comes out. One way to ensure that resources are not wasted is to use quality concrete forming systems.

What are Concrete Forming Systems

Concrete forming systems, as its name suggests, are cement molds that keep the liquid cement holding a particular form or shape until it dries up completely. Their functionality is crucial to the efficiency of the job site because the sturdiness and durability of the structure relies on the products resulting from them.

The Benefits of Using Modern Concrete Forming Systems for Your Structures

1_1_orig

The concrete forms used by builders in the United States have come a long way from traditional plywood to metal or combination. It’s not so long ago, just in the 1990s, when modern concrete forming systems have been fully embraced, and there is no denying the impact that it’s made in the construction industry.

The new technologies incorporated in formwork installation have not only increased productivity but cut down on construction expenses as well. Apart from improving efficiency, this new technique also ensures structural integrity. It’s no wonder many contractors are beginning to invest in modern concrete forming systems for a more lucrative enterprise.

Read more here: http://www.lecoconcreteforms.com/blog/the-benefits-of-using-modern-concrete-forming-systems-for-your-structures

Concrete Placement and Curing in Quality Concrete Forming Systems

concrete-placement-and-curing-in-quality-concrete-forming-systems_orig

Despite the increasing popularity of modular and shipping container construction, concrete is still the most important building material, and for good reasons. Its compressive strength is unparalleled; no metal can rival it. In fact, metal is good at resisting tension, not compression. This is why in most structures, concrete and metal always go together and form what is known as reinforced concrete. Here’s a quick look at how concrete is prepared and poured into formwork.

Preparing the Formwork

There are other steps preceding formwork preparation but it’s this part where concrete actually starts to be involved. Concrete forms are crucial in the building process because they hold concrete until it hardens. They are made from wood, metal, or plastic, although in most large projects where huge volumes of concrete are involved, metal forms are the best option. There are suppliers that offer metal concrete forming systems to builders to help them achieve the best result.

Read more here: http://www.lecoconcreteforms.com/blog/concrete-placement-and-curing-in-quality-concrete-forming-systems

Tips on Safety and Productivity When Using Concrete Forming Systems

safety

Accidents can happen anytime at construction sites, exposing both workers and passersby to safety risks. One way to avoid such unfortunate incidents is to enforce strict safety measures. This is important to any contractors working with concrete forming systems and other related construction activities. Following these tips will not only ensure safety but also increase productivity.

Choose the Right Formwork

The formwork system you’ll use will affect several aspects of your construction project such as schedule, labor requirements, and cost. Contractors basically have two choices. One is an inexpensive forming material that would require more intensive labor. This will extend the period that workers will have to spend in the construction site.

Read more on this article: http://bit.ly/2sw8thB

How to Maintain Your Concrete Forming Systems for Longer Term Use

appropriate-form-oil_orig

Construction is an industry that’s notorious for long project times. If you want to work to dispel this reputation, you’ll need to use methods that allow you to build quicker. Reusable concrete forming systems can help you to build the walls of a project in as little as a day, so they’re more than worth the purchase.

If your business chooses to invest in reusable aluminum concrete forming systems, you should first know how to care for them properly so that they last a long time. Some concrete forming systems can last for as long as 2,000 pours, but to reach this figure, you must implement certain measures. Read more on this article: http://bit.ly/2sa63bJ